English
CN

Ngwaahịa

Nickel Plating Countersunk Isi skru na-emetụ onwe ya

Nickel Plating Countersunk Isi ọpịpịpị skru egosipụtara
  • Nickel Plating Countersunk Isi skru na-emetụ onwe ya
  • Nickel Plating Countersunk Isi skru na-emetụ onwe ya
  • Nickel Plating Countersunk Isi skru na-emetụ onwe ya
  • Nickel Plating Countersunk Isi skru na-emetụ onwe ya
  • Nickel Plating Countersunk Isi skru na-emetụ onwe ya
  • Nickel Plating Countersunk Isi skru na-emetụ onwe ya

Nkọwapụta mmepụta:

Ụdị isi Onye isi CSK
Ụdị ụgbọala Phillips ụgbọala
Dayameta M3.5(#6) M3.9(#7) M4.2(#8) M4.8(#10) M5.5(#12) M6.3(#14)
Ogologo Site na 13mm ruo 100mm
Ihe onwunwe 1022A
Mechaa Ngwa nickel plating

 


Nkọwa ngwaahịa

Mkpado ngwaahịa

Uru

Uru nke Iji skru nke onwe

1) A na-emepụta ihe nkedo nke onwe ya iji belata oge nkwadebe nke ọrụ site na iwepu mkpa maka ịkwọ ụgbọ mmiri ma ọ bụ washers.

2) A na-eji ha nke ọma na ụlọ ọrụ ụgbọ ala na ihe owuwu.

3) Ọ na-ahapụkwa obere ihe fọdụrụ ka ị ghara ichegbu onwe gị maka ọgbaghara ọ na-ahapụkarị.

Uru nke Iji Nickel plating

1) Nchikota nickel na-enye ngwakọta pụrụ iche nke corrosion ma na-eyi nguzogide.

2) Ọ nwere ike ịgbakwunye nchapụta, ọkụ na mmasị.

3) Ọ na-enyekwa ihe ndị magburu onwe adhesion Njirimara maka ụdi mkpuchi n'ígwé

Usoro ngwaahịa

Nlele

Nha (inch)

Nha (mm)

Nlele

Nha(inch)

Nha (mm)

#6
(3.5mm)

 #6 x 1/2"

3.5X13

#7
(3.9mm)

 #7 x 1/2"

3.9X13
#6 x 5/8"

3.5X16

 #7 x 5/8"

3.9X16
#6 x 3/4"

3.5 x19

 #7 x 3/4"

3,9x19
#6 x 1"

3.5X25

 #7 x 1"

3.9X25
#6 x 1-1/4"

3.5X32

 #7 x 1-1/4"

3.9X32
#6 x 1-3/8"

3.5X35

 #7 x 1-3/8"

3.9X35
#6 x 1-1/2"

3.5X38

 #7 x 1-1/2"

3.9X38
#6 x 1-5/8"

3.5X41

 #7 x 1-5/8"

3.9X41
#6 x 1-3/4"

3.5X45

 #7 x 1-3/4"

3.9X45
#6 x 2"

3.5X50

 #7 x 2"

3.9X50
#6 x 2-1/8"

3.5X55

 #7 x 2-1/8"

3.9X55
#6 x 2-1/4"

3.5X60

 #7 x 2-1/4"

3.9X60
#6 x 2-1/2"

3.5X63

 #7 x 2-1/2"

3.9X63
#6 x 3"

3.5X75

 #7 x 3"

3.9X75

 

#8
(4.2mm)

 #8 x 1/2"

4.2X13

#10
(4.8mm)

 #10 x 3/4"

4.8 x19
#8 x 5/8"

4.2X16

 #10 x 1"

4.8X25
#8 x 3/4"

4.2x19

 #10 x 1-1/8"

4.8X30
#8 x 1"

4.2X25

 #10 x 1-1/4"

4.8X32
#8 x 1-1/8"

4.2X30

 #10 x 1-3/8"

4.8X35
#8 x 1-1/4"

4.2X32

 #10 x 1-1/2"

4.8X38
#8 x 1-3/8"

4.2X35

 #10 x 1-5/8"

4.8X41
#8 x 1-1/2"

4.2X38

 #10 x 1-3/4"

4.8X45
#8 x 1-3/4"

4.2X45

 #10 x 2"

4.8X50
#8 x 2"

4.2X50

 #10 x 2-1/8"

4.8X55
#8 x 2-1/4"

4.2X60

 #10 x 2-1/4"

4.8X60
#8 x 2-1/2"

4.2X63

 #10 x 2-1/2"

4.8X63
#8 x 3"

4.2X75

 #10 x 3"

4.8X75
#8 x 4"

4.2X100

 #10 x 4"

4.8X100

Okwu Mmalite Factory na Uru

Na 2008, Tianjin Xinruifeng Technology Co., Ltd. e guzobere na mara mma n'ụsọ oké osimiri obodo Tianjin.Ka ihe karịrị mmepe afọ iri gasịrị, anyị na-emepụta na ịzụ ahịa combo nwere ikike dị mma na imewe, mmepe, mmepụta na mbupụ.Ngwaahịa anyị bụ isi gụnyere skru drywall, screws chipboard, skru na-egwupụta onwe ya, na ihe nkedo nke onwe, nke a na-emepụta na ntọala 3 dị iche iche nke nwere mpaghara 16,000 square mita.

 

Anyị nwere ihe nrụpụta 280 nke akpaaka, gụnyere igwe ịse waya, igwe igwe oyi, igwe na-akpụgharị eri, igwe ọdụ ọdụ, na ahịrị ọgwụgwọ okpomọkụ.Enwere ihe karịrị ndị ọrụ 100 na ụlọ ọrụ anyị.N'ime ha, e nwere otu R & D nwere ahụmahụ na ọkachamara, nke na-agbaso usoro nchịkwa guzosiri ike na usoro njikwa mma, na-enye anyị ohere ịhazi ngwaahịa ndị dị ka atụmatụ gị / ihe ndị chọrọ ka ọ dị elu.

Ngwa

Ihe nkedo nke na-ejide onwe ya dị mma maka iji ọla, ụdị plastik dị iche iche (plywood, fiberglass, polycarbonates), na ihe nkedo ma ọ bụ ihe a kpụrụ akpụ, dị ka ígwè, aluminum, brass, ma ọ bụ ọla kọpa.

Skru nke na-aka onwe ya na-arụkwa ọrụ maka elu ebe ị na-enweghị ike iji aku chekwaa azụ azụ.

Ngwa ndị a na-ahụkarị gụnyere ịgbachi akụkụ aluminom, itinye braket ígwè na osisi, ma ọ bụ ịtinye skru n'ime ụlọ rọba.

Usoro mmepụta

Ịse Waya

Isi Punching

Eriri Rolling

Ọgwụgwọ okpomọkụ

Mechaa Ọgwụgwọ

Nnwale ịdị mma

Nkwakọ ngwaahịa

Na-ebufe akpa

Mbupu

ngwugwu na Ụgbọ njem

Akpa kpara akpa, katọn, igbe agba + katọn agba, pallet wdg (kwa onye ahịa rịọrọ).

N'ozuzu, mmepụta ga-ewe 4-5 izu maka otu akpa.Biko lelee nkọwapụta n'aka anyị mgbe ị nwere ọnụ ọgụgụ akọwapụtara.Dị ka ụlọ ọrụ mmepụta ihe, anyị nwere ike na-ekwe nkwa na nnyefe nke gị n'oge na ga-agbalị kacha mma izute gị siri ike imecha.Dị ka ọ na-adịkarị, mbupu ndị a ga-esi na ọdụ ụgbọ mmiri Tianjin pụọ.

FAQ

1. kedu ihe bụ skru nke onwe?

"Self tapping kposara, onwe-tapping kposara nwere a dịgasị iche iche nke n'ọnụ na eri ụkpụrụ, na dị na fọrọ nke nta ọ bụla omume ịghasa isi imewe. Common atụmatụ bụ ịghasa eri na-ekpuchi dum ogologo nke ịghasa si n'ọnụ ruo isi na a akpọ. eri siri ike zuru oke maka mkpụrụ a chọrọ, na-emekarị ka ọ sie ike site na usoro ọgwụgwọ okpomọkụ.

Anyị nwere ike ịkpọ skru ndị a dịka isi.

Bugle, CSK, Truss, Pan, Hex, Pan na-emepụta skru nke onwe.

Anyị nwere ike ịkpọ skru ndị a dị ka isi.

Nkọ, ụdị 17 ịcha, akuakuzinwo, ngaji ntụpọ onwe tapping kposara."

2.kedu ka skru nke onwe ya si arụ ọrụ?

Ị nwere ike ijigide osisi ma ọ bụ ígwè site na ọkwọ ụgbọ ala, ị nwekwara ike ịgbanye ígwè na ígwè site na ọkwọ ụgbọala.

3.kedu ihe ịpịpịa onwe ya dị ka?

Ihe nkedo nke onwe ya dị ka skru, enwere isi ma ọ bụ isi dị iche iche dị ka CSK, bugle, truss, pan, Hex head.

4. kedu ihe a na-eji skru nke onwe ya eme ihe?

Ị nwere ike ịgbanye osisi na osisi ma ọ bụ ígwè, ị nwekwara ike ịgbanye ígwè na ígwè.

5.kedu ka esi ewepu skru nke onwe?

Ị nwere ike wepu skru nke onwe gị site na ọkwọ ụgbọala.

6. are self tapping skru dị mma maka osisi?

ee, erighị ihe nkedo drywall ịghasa, chipboard skru, osisi kposara, hex head self tapping skru with sharp point, hex head self tapping screw with ngaji point, hex head self tapping screw with drill point.

7.kedu ka esi atụ skru nke onwe?

Ị nwere ike tụọ ịghasa onwe gị site na calipers.

8.kedu arọ ole onye ọtụ aka nwere ike ijide?

Ihe nkedo nke nha dị iche iche na-ejide onwe ya dị iche iche.

9.kedu ka esi eji skru nke onwe na-enweghị egwu egwu?

Ị nwere ike iji skru nke onwe gị na-enweghị mkpọpu site na ọkwọ ụgbọala na-erughị 3mm ọkpụrụkpụ metal.

10. kedu ihe bụ skru na-akụ onwe ya?

A na-eji skru na-akụ onwe ya eme ihe maka ịkwado ihe ndozi oche.

  • Nke gara aga:
  • Osote:

    • Ngwaahịa ndị emetụtara

    Zinc White Plated Fine Thread Phillips Drive Drywall skru

    Zinc ọcha nwere ọmarịcha ebe a...

    Xinruifeng Fastener Ruspert Zinc Ugboro abụọ eriri mkpuchi mkpuchi hex washer isi ihe nkedo nke onwe.

    Xinruifeng Fastener Ruspert ...

    Ọcha odo/Ọcha Zinc Plated countersunk Head Chipboard skru

    Yellow/White Zinc Plated Co...

    Truss Head Drill Point Screw Black Phosphate Self Drilling Screws

    Truss Head Drill Point Scre...

    Xinruifeng Fastener Carbon Steel High Quality Square Drive White Zinc Plated Self Tapping Screw

    Carbon nke Xinruifeng Fastener ...

    Mkpọsa ekpokọtara ọnụ ojii phosphate agbakọkọtara skru

    Black phosp skru agbakọkọtara...